Canyon CNP-WF514A User Manual download pdf (Page 7)

EN - 7

Getting Started

Connecting to Device

Please follow the steps below to connect the modem and PC(s) with CANYON

CNP-WF514A:

1. Begin by searching for an appropriate location to setup device. Please keep

in mind to keep the device in the center of working area as the signal

strength and data transfer rate falls off with distance.

2. It is also recommended to place device at a higher position to ensure

minimum obstacle interference.

3. Make sure that all network devices are powered off, including the device

itself, PCs, switches, cable or DSL modem, and other peripherals.

4. Connect the modem to WAN port of the device by one CAT 5 Ethernet

cable.

5. Connect PC(s) with the LAN ports (PC1/PC2/PC3/PC4) of the device by CAT

5 Ethernet cables. One PC connects to only one port using one cable.

6. Power on the cable or DSL modem.

7. Plug in the power of the device. The Power status indicator at the front

panel of device will light up as soon as the power adapter is connected

properly.

8. Power on PC(s).

Windows XP Setup

1. Click on Start  Settings  Control Panel.

2. Click on Network and Internet Connections icon.

3. Click on Network Connections

4. Right click on Local Area Connection icon and click on Properties.

5. Select TCP/IP option and click on Properties. The Properties dialog box will

be displayed.

6. Check “Obtain an IP address automatically” and “Obtain DNS server

address automatically” options.

7. Click Ok to confirm modifications.

1 2 3 4 5 6 7 8 9 10 11 12 ... 47 48

No comments

Canyon CNP-WF514A User Manual Page 7