Canyon CNP-WFAP User Manual

EN - 1 CNP-WFAP Wireless Access Point User Manual

EN - 10 Wireless AP Configuration Wizard 1. Start Wireless AP Configuration Wizard z Internet Configuration Wizard will pop up upon successful l

EN - 11z Select Radio Mode from the drop down box. (AP+WDS is recommended) z Type in SSID as desired. (SSID must be identical in all devices connec

EN - 12Status 1. This section displays basic router information. z LAN Status: LAN interface parameters of the device. z Wireless Status: WLAN i

EN - 132. Select Radio Band and Radio Mode from the drop down menu boxes. 3. Check on Booster Mode to increase throughput of data transmission. Unc

EN - 14z WEP: 1. WEP (Wired Equivalent Privacy) utilizes a combination of 64-bit or 128-bit keys to provide access control and encryption security.

EN - 15 z WPA2 Personal 1. WPA2 is a more advanced version of WPA which only authenticates access and encrypts data transmission with AES type. 2.

EN - 16MAC Filter 1. This section specifies wireless access control based on MAC address of PC(s). 2. Check on Enable Wireless Access Control and

EN - 17the network. Select a router device and click on Delete to remove it from table. 4. Click on Save to save modified settings. Advanced 1.

EN - 18Client Info 1. This section displays all PC(s) connected to device via wireless network. 2. Click on Refresh to update table. Site Surv

EN - 19DHCP Server DHCP Setup 1. This section assists user to designate a specific IP address to the device and other IP addresses to PC(s) or net

EN - 2Table of Contents INTRODUCTION...

EN - 201. Reserve a specific DHCP IP Address to a PC or network device. Type in Description if necessary. 2. Type in the client’s MAC address and d

EN - 21Firmware Upgrade 1. This section displays current device firmware version. 2. Click on Browse to locate firmware file on host PC. 3. Click

EN - 22Troubleshooting Please refer to the following procedures if CNP-WFAP does not function as it should be. Be advised that the following instruc

EN - 23Appendix Technical Specifications Standards IEEE 802.3, IEEE 802.3u, IEEE 802.11g, IEEE802.11b Modulation Technology Orthogonal Frequency

EN - 3Thank you for purchasing CANYON CNP-WFAP. We sincerely wish you to enjoy the wireless access point. It provides user an easy and stable high sp

EN - 4Package Contents Product Image Item Name CNP-WFAP Main Unit Standing Base Power Adapter Warranty Card Quick Guide Documentation CD

EN - 5Hardware Overview PWR Power status indicator CPU Device status indicator LINK LAN connection status indicator SPD Transmission activity st

EN - 6Getting Started Connecting to Device Please follow the steps below to connect the modem and PC(s) with CANYON CNP-WFAP: 1. Begin by search

EN - 7Windows Vista Setup 1. Click on Start Æ Settings Æ Network Connections. 2. Right click on Local Area Connection icon and click on Properties

EN - 8by selecting them and clicking on Remove. 8. From DNS Configuration dialog box, remove all entries from DNS server search order box and Domain

EN - 9Device Configuration Before setting up the device, please make sure that the host PC(s) is set on the IP sub-network accessible by CANYON CNP-